PDA

View Full Version : air grabber hood



mogger7
04-21-2015, 05:06 PM
The flap on my 70 amx hood is vac. operated but not hooked up Any one know which is the correct place to hook it to and what about vac. brake booster where is it connected? The orig. carb. was replaced with a holly carb (650 maybe)with only one big port on the back side
with a 3/8 hose going to a rubber plug or grommet on the back of the intake

any help would be great
Thanks
mogger7

3904speed
04-26-2015, 04:35 PM
Hello I'm just a new guy in a rookie but I think you need a vacuum pump that is also part of the fuel pump that's what runs my Wind shield wipers I would presume it will run that just fine good luck

Big Bad AMX
04-30-2015, 04:07 PM
I'm not sure how its routed. You may want to invest in a 1970 Technical Service Manual (TSM). They are a huge help when working on these cars. I'd look on ebay for one.

I do know that Tony Zamisch http://www.californiaclassicamc.com/AMCservices.html has actuators, or can rebuild yours, if needed. He could tell you how it's routed as well.