Results 1 to 1 of 1

Threaded View

  1. #1

    Default Vacuum to Electric Wiper conversion help

    I was curious if anyone here knows the correct wiring configuration for the electric wiper motor/switch for a 1969 AMX?

    Looking at the wiper switch;

    I can assume that the L connectors coming from the wiper motor (with red/yellow and black/blue wire combinations) would go to the following terminal groups...

    F1
    F2

    A
    P

    I'm not sure which L connector goes with which group though.

    As for the other two terminals... B and W; I can assume that B connects with the brown wire (of the wiring harness), but what is the W for?? I have researched the 1969 AMC AMX Technical Service Manual for my AMX and I cannot find good information for the electric wiper motor/switch other than it's relationship with the brown wire of the wiring harness.
    Last edited by 1969AMX; 02-09-2008 at 09:15 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •