Results 1 to 3 of 3
  1. #1

    Default AMC EFI Recommendations?

    Does anyone have any experience, preferences, likes and/or dislikes with any of these AMC EFI systems?

    Affordable Fuel Injection:
    http://www.affordable-fuel-injection...Fuel+Injection

    Edelbrock Fuel Injection:
    http://www.edelbrock.com/automotive_...i/pf_amc.shtml

    F.A.S.T. EZ EFI:
    http://www.fuelairspark.com/WhatsNew...rottlebody.pdf

    Howell Fuel Injection:
    http://www.howellefi.com/shop/custom...cat=252&page=1

    Mass-Flo Fuel Injection:
    http://www.mass-floefi.com/mass-flo.html

    Professional Products EFI System:
    http://www.professional-products.com/efiSystems.html

    Retrotek EFI:
    http://www.retrotekspeed.com/product...ngle-quad.html

    Here's the vehicle I have:
    1974 AMX, loaded
    Non-emissions 360 w/Ram Air Systems Cold Air & Trendsetters
    727 Torque Command
    Stock Gearing (either 3.15 or 3.54, not sure)

    Additional Mods I Will Be Making:
    Sig Erson TQ20 cam
    Aftermarket aluminum intake manifold (included with Edelbrock)
    Aftermarket distributor (included with Edelbrock). I already have a Proform HEI conversion distributor (brand new, never installed)
    Eventually, a stroker crank with 9.5:1 pistons, mild porting/polishing to heads w/valve job, balance & blueprint to AMC specs and a mechanical 700R4.

    Here's How The Car Will Be used:
    Fun
    Long trips to high altitude areas
    City/highway driving
    No serious racing

    Goals:
    Reliable starts
    Better mileage
    Better throttle response (regardless of altitude)
    More Power
    Good after purchase tech support
    Access to replacement parts
    Minimization of headaches

    I have a Windows XP laptop and a chassis dyno tuner nearby (unless the recommended system does not need tuning or can be done with an included stand alone computer).

  2. #2

    Default

    I don't have any experience with FI but a club member has a 69 Javelin with a 343 and has the Edelbrock kit. He loves it and uses his car the same as you list how you'll be using yours. This is in the Denver, CO area and he has had no issues with altitude, at least not to my knowledge. I haven't heard any complaints about the AMC Edelbrock kit at all and if I were to put FI on my car it'd be my first choice.

    Excellent cam choice btw. It's a timing sensitive but once dialed in I wouldn't be surprised to see an easy 25mpg with your setup.



    .





  3. #3

    Default

    I talked to the Javelin EFI owner at the RMAMC show about his system. Attached are some photos. He said he really likes the setup and it being a complete system (some don't include the dist.) makes the install a bit easier. Intake manifold is an AirGap. He ran the fuel and fuel return lines through the passenger side inner fender well. It's a clean setup and he has had no problems or issues with it.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	AMCEFI2.jpg 
Views:	797 
Size:	106.4 KB 
ID:	37   Click image for larger version. 

Name:	AMCEFI1.jpg 
Views:	740 
Size:	93.2 KB 
ID:	38   Click image for larger version. 

Name:	AMCEFI3.jpg 
Views:	764 
Size:	107.7 KB 
ID:	39  

    Click image for larger version. 

Name:	AMCEFI4.jpg 
Views:	750 
Size:	69.9 KB 
ID:	40  





Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •