Results 1 to 3 of 3
  1. #1

    Default rebuilt 390 value?

    Hello,

    I'm looking to place a price on my rebuilt 390 engine but I only have a rough idea. I had it professionally rebuilt at a machine shop in Nashua, NH 8 yrs ago with the intent of putting it back into my fathers 68"AMX. Now I'm thinking of selling it.
    It's been kept on an engine stand inside a garage. I turn the crank every couple months and always keep a little oil in the cylinders. I live in NH. Below is a list of the work I had done as well as the new parts I bought. The engine has NEVER been started and I have receipts and boxes for everything, including instructions.

    Any help on the value and a realistic price to ask would be greatly appreciated. THANKS.

    Engine kit
    New Rockers, springs, conn. rods & valves
    8 Plugs
    Bored block .030
    Turned crank
    Hot tanked block
    8 Hard exhaust seats
    Valve job
    Decked heads
    Installed Mallory elect. dist.
    8 pistons
    ------------------------------$1,969.00

    Edlebrock Thunder Series Carb. 1806 650 CFM AVS Electric choke.....$367.95
    Edlebrock Performer RPM Air Gap Aluminum Manifold 7530......$272.95
    New Cam Shaft that came as a kit with the Carb. and Manifold from Summit.....$185.95
    Mallory Unilite Distributor.......$289.95
    Resistor....$14.88
    Power Filter.....$33.88
    High output coil.....$34.88
    Water pump & Thermostat....$
    Alternator.....$85.18
    Fuel pump.....$73.28
    -------------------------------$1,358.90 TOTAL......$3,327.9

  2. #2

    Default

    Quote Originally Posted by Jared View Post
    Hello,

    I'm looking to place a price on my rebuilt 390 engine but I only have a rough idea. I had it professionally rebuilt at a machine shop in Nashua, NH 8 yrs ago with the intent of putting it back into my fathers 68"AMX. Now I'm thinking of selling it.
    It's been kept on an engine stand inside a garage. I turn the crank every couple months and always keep a little oil in the cylinders. I live in NH. Below is a list of the work I had done as well as the new parts I bought. The engine has NEVER been started and I have receipts and boxes for everything, including instructions.

    Any help on the value and a realistic price to ask would be greatly appreciated. THANKS.

    Engine kit
    New Rockers, springs, conn. rods & valves
    8 Plugs
    Bored block .030
    Turned crank
    Hot tanked block
    8 Hard exhaust seats
    Valve job
    Decked heads
    Installed Mallory elect. dist.
    8 pistons
    ------------------------------$1,969.00

    Edlebrock Thunder Series Carb. 1806 650 CFM AVS Electric choke.....$367.95
    Edlebrock Performer RPM Air Gap Aluminum Manifold 7530......$272.95
    New Cam Shaft that came as a kit with the Carb. and Manifold from Summit.....$185.95
    Mallory Unilite Distributor.......$289.95
    Resistor....$14.88
    Power Filter.....$33.88
    High output coil.....$34.88
    Water pump & Thermostat....$
    Alternator.....$85.18
    Fuel pump.....$73.28
    -------------------------------$1,358.90 TOTAL......$3,327.9
    + the block, I'd start around 4k, you can always come down.





  3. #3

    Default

    Thanks for your response and input.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •