Results 1 to 3 of 3

Thread: Backup light

  1. #1
    Join Date
    May 2006
    Location
    Gierle, Belgium
    Posts
    12

    Default Backup light

    Can anyone tell me where the 2 brown wires from the backup lights connect on the t10 transmission? Got a diagram but can't find it on the tranny...

  2. #2
    Join Date
    Feb 2006
    Location
    victorville,CA
    Posts
    172

    Default

    amc stock manual linkage on my 69 i had years back had a plunger switch that mounted to the linkage housing that bolted to the trans if my memory isnt too faded

  3. #3

    Post Back up switch for 4 speeds

    The AMX and Javelins used a plunger switch that was located on the 4 speed linkage. The exact location is where the reverse rod is located there should be a hole in the shifter housing and when you throw into reverse it will engage a plunger switch.
    To replace these switches can be an expensive proposition in that the after market guys are getting about $85-95 for them. The AMX we have doesn't have one there anymore and the wires are taped up until I can find a replacement for it that doesn't cost so much.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •