Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2007
    Location
    Wisconsin
    Posts
    3

    Question Difference of A904 for V6 & V8

    Can somebody tell me what the difference is between the A904 trannies for the 6 version and the V8 version? I've been told the bolt pattern is the same but the bell is shallower along with a shorter input shaft. Is that correct? If so then why wouldn't the 6 version bolt to the back of a V8?

    Thanks,

    Darren
    Last edited by dct73; 06-25-2007 at 03:19 PM.

  2. #2
    Join Date
    Feb 2006
    Location
    victorville,CA
    Posts
    172

    Default

    i think that only applies to manual transmissions as that is 100% true for manual trans.i do not think that is the case for automatics although the six will probably use a smaller diameter torque converter but the length should be the same

  3. #3

    Default

    i have done it before. i took a pacer 904 and bolted it to the back of my 304 gremlin. works fine. just make sure that the starter is on the rite side. i think they changed it somewhere in time!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •