If its a c-6, it will say FoMoCo on it somewhere. The BW will have a tag on its side stating Borg-Warner I believe. If its a c-6, then its a custom install. C-6 is STRONG.
Results 1 to 10 of 10
Thread: Disc Brakes?
Hybrid View
-
05-31-2005, 12:51 AM #1
Junior Member
- Join Date
- Apr 2005
- Location
- Birmingham
- Posts
- 9
-
05-31-2005, 07:31 PM #2
Moderator
- Join Date
- Oct 2004
- Posts
- 728
Brakes upgrade:
http://www.amx-perience.com/American...read.php?t=129
To confirm the correct cid for the AMC V-8 the cid number is cast on the sides of the block in approximately 2" high numbers, they’re located behind (above) the engine mounts.
For Ford BB casting numbers try : Gear Head Racing
.
-
06-07-2005, 10:23 PM #3
Junior Member
- Join Date
- May 2005
- Location
- Ohio
- Posts
- 3
I recently found out the deal with AMC stamping in the cubic inches of the block on the block in big numbers, and i found out the 390 is not a 390 but a 360, would this change the tranny?
-
06-08-2005, 10:41 AM #4
Member
- Join Date
- Feb 2005
- Posts
- 91
Hi, it looks like you may have a 727 on the 360... to check look at the carb linkage. You will find a lever and rod assembly that will go behind head and down to the tranny. The 727 is a good option since the BW's are weak. To bad about the 360, but you do still have dogleg ports on the heads... which will be a lot better than the 67-69 343 and 390.
Reply With Quote
Posting Permissions
|
|
|